Tv Components; Package Contents; Front; Back - Dynex DX-40L261A12 User Manual

TV components

TV components

Package contents

Remote control and batteries (2 AAA)
Stand with screws
Composite video cable
Audio cable
Power cord
Quick Setup Guide

Front

# Item Description
Press to open the on-screen menu. For
1
more information, see "Navigating the
MENU
menus" on page 17.
Press to open the Source List, then press
or
2
INPUT
In menu mode, press to confirm
selections.
Press to increase or decrease the
3
VOLUME+/VOLUME–
volume.
Press to go to the next or previous
channel in the channel list. For more
CHANNEL /
4
information, see "Selecting a channel"
CHANNEL
on page 17.
Press to turn your TV on or off (Standby
mode). When your TV is off, power still
5
(power)
flows into it. To disconnect power,
unplug the power cord.
Receives the signals from the remote
6
Remote sensor
control. Do not block.
Turns off when your TV is turned on.
Lights red when your TV is in standby
mode.
Flashes red when your TV receives no
signal from VGA and enters DPMS
7
Power indicator
mode.
Turns off when power cord is
unplugged.
For more information, see "Turning your
TV on or off" on page 16.
to select a video input source.

Back

# Item Description
Connect the supplied power cord here.
1
AC IN
Connect headphones to this jack. For
2 more information, see "Connecting
(headphone)
headphones" on page 15.
Connect an audio amplifier to this jack.
3 For more information, see "Using digital
DIGITAL OUT
audio" on page 15.
Connect an antenna or cable TV to this
jack. For more information, see
4
ANT/CABLE IN
"Connecting an antenna or cable TV (no
box)" on page 10.
Connect the video for a component
video device to these jacks. Connect the
COMPONENT Y/P /P
B R
5
audio to the L and R jacks. For more
and L/R Audio IN
information, see "Using component
video (better)" on pages 9 or 12.
Connect the video cable from a
composite video device to the VIDEO
6 jack and the audio to the L and R jacks.
AV IN
For more information, see "Using
composite video (good)" on page 9.
Connect the video (VGA) for a computer
7 to this jack. For more information, see
PC IN VGA
"Using VGA" on page 14.
Connect the audio for a computer or a
DVI device to this jack. For more
information, see "Using VGA" on page
8
PC IN AUDIO
14 or "Using DVI (same as HDMI but
requires an audio connection)" on
pages 8 or 11.
Connect HDMI devices to these jacks.
An HDMI cable carries both video and
sound. You do not need to make an
audio connection for an HDMI device.
9
For more information, see "Using HDMI
HDMI1/HDMI2
(best)" on pages 8, 11, or 14.
When connecting a DVI device using an
HDMI-DVI adapter, connect the device
to the HDMI1 jack.
For software update only. Do not use.
10
Service port
5
DX-40L261A12