Connecting A Home Theater System With Multiple Devices; Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Dynex DX-32E250A12 User Manual

16
DX-32E250A12
Connecting a home theater system with
multiple devices
Note
We recommend that you connect the AV receiver's
HDMI OUT jack to your TV's HDMI1/DVI IN jack, and
AV receiver's Audio IN to your TV's Digital Output jack
when you:
• Have a game console connected to one of your
TV's HDMI2 IN jacks.
• Watch a program through an antenna or cable TV
connected to the ANT/ CABLE IN jack.
Blu-ray player/DVD
player/VCR
Game console or
camera
USB flash drive
Computer
The connections you make depend on the video and audio jacks
available on your devices. Refer to the documentation that came with
your devices for connection information.
Just remember to use the best connection types available for the best
picture and sound. For information about connection types, see "What
connection should I use?" on page 7.
Cable or satellite TV box
AV receiver
Antenna or
cable TV
connected
directly to the
wall jack

Using the remote control

Installing remote control batteries

To install the remote control batteries:
1 Remove the battery cover.
2 Insert two AAA batteries into the battery compartment. Make
sure that you match the + and – symbols on the batteries with
the + and – symbols in the battery compartment.
3 Replace the battery cover.
Cautions
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote sensor on the
front of your TV.
Using the remote control