Tv Components; Package Contents; Front; Back - Dynex DX-42E250A12 User Manual

TV components

TV components

Package contents

Remote control and batteries (2 AAA)
Stand with ten screws
Composite video cable
Audio cable
Quick Setup Guide

Front

# Item Description
Press to open the on-screen menu. For
1 more information, see "Navigating the
MENU
menus" on page 17.
Press to open the Source List, then press
or
2
INPUT
In menu mode, press to confirm
selections.
Press to increase or decrease the
3
VOLUME+/VOLUME–
volume.
Press to go to the next or previous
channel in the channel list. For more
CHANNEL /
4
information, see "Selecting a channel"
CHANNEL
on page 17.
Press to turn your TV on or off (Standby
mode). When your TV is off, power still
5
(power)
flows into it. To disconnect power,
unplug the power cord.
Receives the signals from the remote
6
Remote sensor
control. Do not block.
Turns off when your TV is turned on.
Lights red when your TV is in standby
mode.
7
Turns off when power cord is
Power indicator
unplugged.
For more information, see "Turning your
TV on or off" on page 16.
to select a video input source.

Back

# Item Description
For software update only. Do not use.
1
Service port
Connect an HDMI device to these jacks.
An HDMI cable carries both video and
sound. You do not need to make an
audio connection for an HDMI device.
2 For more information, see "Using HDMI
HDMI1/HDMI2
(best)" on pages 8, 11, or 14.
When connecting a DVI device using an
HDMI-DVI adapter, connect the device
to the HDMI1 jack.
Connect the video cable from a
composite video device to the VIDEO
3 jack and the audio to the L and R jacks.
AV IN
For more information, see "Using
composite video (good)" on page 9.
Connect an audio amplifier to this jack.
4 For more information, see "Using digital
DIGITAL OUT
audio" on page 14.
Connect an antenna or cable TV to this
jack. For more information, see
5
ANT/CABLE IN
"Connecting an antenna or cable TV (no
box)" on page 10.
Connect the video for a component
video device to these jacks. Connect the
COMPONENT Y/P /P
B R
6 audio to the L and R jacks. For more
and L/R Audio IN
information, see "Using component
video (better)" on pages 9 or 12.
5
DX-42E250A12