Installing The Stand Or Wall-Mount Bracket; Installing The Stand; Installing A Wall-Mount Bracket; Tv Components - Dynex DX-32L230A12 User Manual

4
DX-32L230A12
Installing the stand or
wall-mount bracket
Notes:
• If you plan to wall-mount your TV, do not install the stand.
• Store the stand and stand screws in case you decide to use the stand
in the future.

Installing the stand

To install the stand:
1 Carefully place your TV screen face-down on a cushioned, clean
surface to protect the screen from damages and scratches.
2 Align the screw holes on the stand with the holes on the bottom
edge of the TV, then secure the stand with the screws provided
(four M5 x 8 mm screws ).
Note:
The wide portion of the stand should go towards the front of the TV.

Installing a wall-mount bracket

Warning: This apparatus is intended to be supported by a UL Listed wall
mount bracket.
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a cushioned, clean
surface to protect the screen from damages and scratches.
2 Remove the screws that secure the stand column to the stand,
then remove the stand.
Locators
Locating grooves
Stand
M5 x 8 mm screws
Stand
Remove the screws

Installing the stand or wall-mount bracket

3 Remove the four screws that secure the stand column to the TV,
then remove the column.
4 Attach the wall-mount bracket to your TV using the mounting
holes on the back of your TV. See the instructions that came with
the wall-mount bracket for information about how to correctly
hang your TV.
Note:
The length of the wall-mount screws vary depending on the
wall-mount bracket you purchased. See the instructions that came
with the wall-mount bracket for screw lengths.
7.84 in. (200 mm)

TV components

Package contents

• Remote control and batteries (2 AAA)
• Stand with screws
• Composite cable
• AC power cord
• Quick Setup Guide
Remove the screws
Wall mount brackets