4
DX-26L100A13
Installing the stand or
wall-mount bracket
Notes
•
If you plan to wall-mount your TV, do not install
the stand.
•
Store the stand and stand screws in case you
decide to use the stand in the future.
Installing the stand
To install the stand:
1
Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches.
2
Secure the stand to the stand column on the TV with
the six screws M4 type (16 mm) provided.
Installing a wall-mount bracket
Warning
This apparatus is intended to be supported by a UL
Listed wall mount bracket.
To attach your TV to a wall-mount bracket:
1
Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches. If the base is not connected,
skip to Step 3.
2
Remove the six screws that secure the base to the
stand, then remove the base.
Installing the stand or wall-mount bracket
3
Attach the wall-mount bracket to your TV using the
mounting holes on the back of your TV. See the
instructions that came with the wall-mount bracket
for information about how to correctly hang your TV.
Note
The length of the
depending on the wall-mount bracket you
purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
TV components
Package contents
• Remote control and batteries (2 AAA)
• Stand with screws
• Quick Setup Guide
• Important Information
M4
wall-mount screws vary
7.87 in. (200 mm)
Wall mount bracket holes