Installing The Stand Or Wall-Mount Bracket; Installing The Stand; Installing A Wall-Mount Bracket - Dynex DX-32E250A12 User Manual

4
DX-32E250A12
Installing the stand or
wall-mount bracket
Notes
If you plan to wall-mount your TV, do not install the
stand.
Store the stand and stand screws in case you decide
to use the stand in the future.

Installing the stand

To install the stand:
1 Carefully place your TV screen face-down on a cushioned, clean
surface to protect the screen from damages and scratches.
2 Secure the stand to the screen with the four provided screws.
Model
DX-32E250A12
Screw type Screw length
T4 type 25 mm

Installing the stand or wall-mount bracket

Installing a wall-mount bracket

Warning
This apparatus is intended to be supported by a UL
Listed wall mount bracket.
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a cushioned, clean
surface to protect the screen from damages and scratches.
2 Remove the four screws that secure the stand cover and stand to
the TV, then remove the stand cover and stand.
3 Secure the flat stand cover to the back of your TV using the four
screws you just removed.
Note
The length of the wall-mount screws vary depending
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.
7.84 in. (200 mm)
Wall mount brackets