Dynex DX-32E250A12 User Manual page 16

12
DX-32E250A12
Using component video (better)
To connect a DVD or Blu-ray player using component video:
1 Make sure that your TV's power cord is unplugged and the DVD or
Blu-ray player is turned off.
2 Connect a component video cable (not included) to the Y/P
(component video) jacks on the side of your TV and to the
COMPONENT OUT jacks on the component video device.
Side of TV
3 Connect an audio cable (not included) to the L/R (audio in) jacks
on the side of your TV and to the L/R AUDIO OUT jacks on the
component video device.
Notes
The Y/Pb/Pr (component video) jacks shares the
audio jacks with the CVBS jacks.
When you connect the audio using the L and R audio
jacks, the audio output is analog.
If your TV has a digital audio jack (optical or coaxial),
you can connect the video to the component video
jacks and connect the audio to the digital audio jack
to get digital audio output.
4 Turn on your TV, then turn on the DVD or Blu-ray player.
5 Press INPUT to open the Input Source list.
6 Press or to select Component/AV, then press ENTER.
Note
You can also press COMP to select the component
DVD or Blu-ray player.
Using composite video (good)
To connect a DVD or Blu-ray player using composite video:
/P
B R
DVD or Blu-ray player
Audio cable
Component video
cable
The audio cables are color coded (white
and red) to the L and R audio jacks.
The video cable (yellow) shares a jack with
the component Y cable and goes to the
green jack.
1 Make sure that your TV's power cord is unplugged and the DVD or
Blu-ray player is turned off.
2 Connect a composite cable (included) to the Y/VIDEO and L/R
(audio in) jacks on the side of your TV and to the AV OUT jacks on
the DVD or Blu-ray player.
Note
When you connect the audio using the L and R audio
jacks, the audio output is analog.
Side of TV
3 Turn on your TV, then turn on the DVD or Blu-ray player.
4 Press INPUT to open the Input Source list.
5 Press or to select Component/AV, then press ENTER.
Notes
• You can also press VIDEO to select the DVD or
Blu-ray player.
• If you are not using the included audio cable for
another device, you can use it and a standard
one-plug video cable instead of the three-plug
cable shown in this task.
• The Y/VIDEO jack shares the audio jacks with
the Y/Pb/Pr (component video) jacks.
Making connections
DVD or Blu-ray player
AV cable