Connecting A Usb Flash Drive; Connecting A Basic Home Theater System - Dynex DX-32E250A12 User Manual

Making connections

Connecting a USB flash drive

This TV does not support .JPEG or .JPG files. The USB port is for firmware
upgrades only.
To connect a USB flash drive:
• Plug a USB flash drive into the SERVICE PORT on the side of your
TV.
Caution
Do not remote the USB flash drive or turn off the TV
while using the USB flash drive. You may lose data or
damage the USB flash drive.
Notes
• The USB flash drive is only for firmware
upgrading.
USB flash
drive
Side of TV

Connecting a basic home theater system

Using digital audio
To connect a basic home theater system using digital audio:
1 Make sure that your TV's power cord is unplugged and the home
theater system is turned off.
2 Connect a digital optical audio cable to the DIGITAL OUTPUT
jack on the back of your TV and to the digital optical audio jack on
the digital home theater system.
Back of TV
Using analog audio
To connect a basic home theater system using analog audio:
1 Make sure that your TV's power cord is unplugged and the home
theater system is turned off.
2 Connect an audio cable to the AUDIO OUT jacks on the back of
your TV and to the AUDIO IN jacks on the home theater system.
Back of TV
15
DX-32E250A12
Home theater system
Digital optical
audio cable
Home theater system
Analog
audio cable