Ftp Settings Menu - Dell B5465dnf Mono Laser Printer MFP User Manual

Understanding the printer menus
Use
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Use cc:/bcc:
Off
On

FTP Settings menu

Use
Format
PDF (.pdf)
Secure PDF (.pdf)
TIFF (.tif)
JPEG (.jpg)
XPS (.xps)
PDF Version
1.2–1.6
A–1a
Content Type
Text
Graphics
Text/Photo
Photo
To
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Enable the user to specify "warm" or "cool" outputs. "Cool" values generate a bluer
output than the default while "warm" values generate a redder output than the
default.
Enable the use of the "cc:" and "bcc:" fields.
Note: Off is the factory default setting.
To
Specify the format of the file for FTP sending.
Note: PDF (.pdf) is the factory default setting.
Set the version level of the PDF file for FTP sending.
Note: 1.5 is the factory default setting.
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
202