Dell B5465dnf Mono Laser Printer MFP User Manual page 280

Troubleshooting
Action
Step 7
Check if the printer is plugged into any surge protectors, uninterruptible
power supplies, or extension cords.
Is the printer plugged into any surge protectors, uninterruptible power
supplies, or extension cords?
Step 8
Check if one end of the printer cable is plugged into a port on the printer
and the other to the computer, print server, option, or other network
device.
Is the printer cable securely attached to the printer and the computer,
print server, option, or other network device?
Step 9
Make sure to install all hardware options properly and remove any packing
material.
Are all hardware options properly installed and all packing material
removed?
Step 10
Check if you have selected the correct port settings in the printer driver.
Are the port settings correct?
Step 11
Check the installed printer driver.
Is the correct printer driver installed?
Step 12
Turn off the printer, then wait for about 10 seconds, and then turn the
printer back on.
Is the printer working?
Yes No
Connect the printer Go to step 8.
power cord directly to
a properly grounded
electrical outlet.
Go to step 9. Connect the printer
cable securely to the
printer and the
computer, print server,
option, or other
network device.
Go to step 10. Turn off the printer,
remove all packing
materials, then
reinstall the hardware
options, and then turn
on the printer.
Go to step 11. Use correct printer
driver settings.
Go to step 12. Install the correct
printer driver.
The problem is solved. Contact
support.
280
technical