Dell B5465dnf Mono Laser Printer MFP User Manual page 205

Understanding the printer menus
Use
File Name
Custom Job Scanning
Off
On
Scan Preview
On
Off
Allow Save as Shortcut
On
Off
Background Removal
‑4 to 4
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
To
Enter a base file name.
Note: The limitation is 53 characters.
Copy a document that contains mixed paper sizes into a single scan job.
Note: Off is the factory default setting.
Specify whether a preview will appear on the display for scan jobs.
Notes:
•
Off is the factory default setting.
•
This menu item appears only when a formatted, working printer hard disk is
installed.
Enable shortcut creation for FTP addresses.
Note: On is the factory default setting.
Adjust the amount of background visible on a copy.
Note: 0 is the factory default setting.
Specify the contrast of the output.
Note: "Best for content" is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness of a scanned image.
Note: 3 is the factory default setting.
Enable the user to specify "warm" or "cool" outputs. "Cool" values generate a bluer
output than the default while "warm" values generate a redder output than the
default.
205