Pictbridge Mode - Dell 964 All In One Photo Printer User Manual

Menu item
View Ink Levels
Clean Cartridges
Align Cartridges
Change Print Cartridges
Print Test Page
Call Diagnostics
Reset Defaults
*Factory default settings

PictBridge Mode

Your printer enters PictBridge Mode automatically when a USB device is plugged into the PictBridge port
located on the front of the printer.
If the printer is busy performing other actions when the USB device is plugged in, the job is completed and
then the printer enters PictBridge Mode .
While a PictBridge camera is connected to your printer, the camera controls the selection and printing of all
photos. However, while the printer is in PictBridge Mode , you can press Menu
PictBridge Default Print Settings menu.
PictBridge Default Settings Menu
Menu item
Paper Size
Photo Size
Action
Press Select to display the current ink level for each cartridge on the screen.
Press Select to clean the ink cartridges.
Press Select to align the ink cartridges.
Press Select to view steps detailing how to change print cartridges.
Press Select to print a test page.
Off*
Audio on
Print T.30 Signals Report
Both Audio and Report
Press Select to reset all settings to factory default settings.
Action
Hagaki
L
2L
A6
10x15cm
A5
13x18cm
B5
A4
4x6
5x7
8.5x11*
Hagaki
L
2L
to access the