Setting The System - Sharp LC-30AD1E Operation Manual

Preparation

Setting the System

After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamps for bundling the cables.
1
Removing the terminal cover
2
Connecting the system cable and the AC cord to the Display
Connect the plug firmly
until the hooks on both
3
Connecting the system cable and the AC cord to the AVC System
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
8
LC-30AD1E(E)-a
Display (rear view)
(GREY)
sides click.
(BLACK)
System cable
AVC System (rear view)
8
Press down the four
upper hooks to remove
the cover toward you.
(WHITE)
Connect the plug into
the terminal and secure
it by tightening the
thumb screws.
System cable
(BLACK)
AC cord
03.10.31, 1:15 PM
AC INPUT
110V–240V
AC cord
(WHITE)
(GREY)