Input Select; Colour System Setting; Selected Input Source - Sharp Aquos LC-32PD5X Operation Manual

Useful adjustment settings

Input Select

Selecting input source
Can use for selecting the input source.
Press TV/VIDEO on the remote control unit or
1
TV/VIDEO on the TV.
Press TV/VIDEO on the remote control unit
2
or TV/VIDEO on the TV to select the input
source.
• An image from the selected source automatically
displays.
• You can also select the input source by pressing
a / b .
Selecting input signal type
For setting the signal type of external equipment.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Input Select", and then
3
press ENTER.
Press a / b to select a signal type you want to
4
set, and then press ENTER.
Input source
INPUT 1
INPUT 2
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to "AUTO", the input terminal
where cable is connected is automatically selected.
• When the signal type is set to "AUTO" and multiple video
signal cables are connected, the signal type is selected in
the following prioritised order:
INPUT 1/INPUT 2: COMPONENT s VIDEO
Selectable item
AUTO, COMPONENT, VIDEO
AUTO, COMPONENT, VIDEO

Colour system setting

You can change the colour system to one that is
compatible with the image on the screen.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Colour System", and
3
then press ENTER.
Press a / b to select a compatible video signal
4
system of your equipment, and then press
ENTER.
NOTE
• Factory preset value is "AUTO".
• If "AUTO" is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
41