Auto Installation - Sharp LC-30AD1E Operation Manual

Basic adjustment settings (Analogue)

Auto installation

You can run auto installation again, even after setting
up the preset channels.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Auto Installation", and
then press OK.
[ Setup ... Auto Installation ]
MENU
Setup
Auto Installation
Programme Setup
Child Lock
Position
WSS
4:3 Mode
Full Mode
Rotate
Language
4
If you already set the PIN, enter it here. If
not, enter the factory preset PIN "1234".
• See page 84 for setting PIN.
LC-30AD1E(E)-c
Option
[On]
[Panorama]
[Mode1]
[Normal]
[English]
– – – –
27
5
Press c/d to select "Yes", and then press
OK.
Yes
6
You can set language and country the same
as in the initial auto installation. Follow steps
1 and 2 on page 14. After this setting, auto
search starts with the following order.
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
You do not need to do anything during the
auto search.
03.10.31, 1:17 PM
No
27