Sharp LC-30AA1H Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. LCD TV
  5. LC-30AA1H
  6. Operation manual
Sharp LC-30AA1H Operation Manual

Sharp LC-30AA1H Operation Manual

Hide thumbs Also See for LC-30AA1H:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual

Contents

Contents ............................................................ 1
Dear SHARP customer .......................................... 2
Supplied accessories .......................................... 5
Preparation ......................................................... 6
Where to place the System ................................. 6
Setting the System .......................................... 7
Removing the stand and speaker ........................ 11
Setting the Display on the wall ........................... 12
Inserting the batteries ....................................... 13
Using the remote control unit .............................. 13
Part names ......................................................... 14
Display ......................................................... 14
AVC System ................................................... 16
Remote control unit .......................................... 17
...................................................... 18
Basic connection ............................................. 18
Connecting to an antenna ........................... 18
Connecting to the power outlet ..................... 18
Turning on the power ....................................... 19
Turning off the power ....................................... 19
volume/sound .......................................... 21
Basic adjustment settings .................................... 24
AV input mode menu items ................................. 24
PC input mode menu items .............................. 24
Programme setup ............................................. 27
Auto search ............................................. 27
Manual setting for each channel .................. 28
Search tuning ....................................... 29
Fine tuning .......................................... 29
Colour system .................................... 30
Labelling channels .............................. 30
Setting the child lock ........................... 31
Sort ......................................................... 32
Booster ................................................... 33
Picture adjustments .......................................... 35
Colour temperature .................................... 37
Black ...................................................... 37
Monochrome ............................................. 38
Film mode ................................................ 38
I/P setting ................................................ 39
DNR (Digital Noise Reduction) ..................... 39
Audio adjustment ............................................. 40
Dolby Virtual ............................................. 40
LC-37AA1H(E)-a
LC-30AA1H
LC-37AA1H
LCD COLOUR TELEVISION
ENGLISH
OPERATION MANUAL
.............................. 2
............... 12
......... 13
............................................. 25
.............................. 31
.................................... 40
1
Power Control ................................................ 41
Power Control for AV source ........................ 41
Power Control for PC source ........................ 43
Using external equipment .................................... 44
Watching a DVD image .................................... 45
Connecting a DVD player ........................... 45
Displaying a DVD image .............................. 45
Watching a VCR image .................................... 46
Connecting a VCR .................................... 46
Displaying a VCR image .............................. 46
images ................................................... 47
camcorder .......................................... 47
Viewing an image from a PC .............................. 48
Connecting a PC ....................................... 48
Displaying an image from a PC ..................... 48
Connecting external speakers ........................... 49
Selecting speakers .................................... 50
Useful adjustment settings .................................... 51
Moving the picture on the screen ........................ 52
Input signal source .......................................... 54
................................................... 55
AV mode selection .......................................... 56
WIDE mode (for AV input mode) ........................ 57
WIDE mode (for PC input mode) ........................ 58
Input signal (PC input mode only) ........................ 59
Rotate ............................................................ 61
Audio out ...................................................... 62
................................................... 62
Cool climate ................................................... 63
Useful features ................................................... 65
Dual screen functions ....................................... 65
......................................................... 67
Troubleshooting ............................................. 67
PC compatibility chart ....................................... 68
RS-232C port specifications .............................. 69
Specifications ................................................ 71
Optional accessories ....................................... 71
Dimensional drawings .......................................... 72
03.11.6, 8:12 AM
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LC-30AA1H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sharp LC-30AA1H

Summary of Contents for Sharp LC-30AA1H

  • Page 1: Table Of Contents

    Input signal (PC input mode only) …………………… 59 Auto search ……………………………………… 27 Selecting Full Mode display Manual setting for each channel ……………… 28 (for AV input mode) (LC-30AA1H only) ………… 60 Search tuning ………………………………… 29 Rotate …………………………………………………… 61 Fine tuning …………………………………… 29 Audio out ………………………………………………...

  • Page 2: Dear Sharp Customer

    Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble- free operation of your product, please read the Important Safety Precautions carefully before using this product. Important Safety Precautions Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
  • Page 3 Important Safety Precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement.
  • Page 4 Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product. LC-30AA1H The LCD panel is a very high technology product with 2,949,120 thin film transistors, giving you fine picture details.

  • Page 5: Supplied Accessories

    Stand unit (for AVC System) (g1) System cable (g1) Antenna cable (g1) Page 7 Page 18 AC cord (g2) Operation manual Stand (g1) LC-30AA1H Stand cushion (g4) LC-37AA1H Stand spacer (g4) Stand screw (g2) Page 12 Page 7 LC-37AA1H(E)-a 03.11.6, 8:12 AM...

  • Page 6: Preparation

    Setting the System in place Handling the Display CAUTION • The LC-37AA1H Display weighs about 25 kg and the LC-30AA1H Display weighs about 20 kg. Move it with two or more people. • Do not remove the stand from the Display unless using an optional bracket to mount it.

  • Page 7: Setting The System

    Preparation Setting the System H LC-37AA1H After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the cable clamps for bundling the cables. Removing the terminal cover Display (rear view) Press the two hooks toward the centre of the Display and remove the cover toward you.
  • Page 8 Preparation Attaching the clamps and bundling the cables with the clamp Cable clamp (Large) Cable clamp (Small) Insert the cable Peel off the seal clamp in the hole on the back and on the Display leg attach as shown. as shown. Display (rear view) Closing the terminal cover Cables come out...
  • Page 9 Preparation Setting the System H LC-30AA1H After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the cable clamps for bundling the cables. Removing the terminal cover Display (rear view) Press down the four upper hooks to remove the cover toward you.
  • Page 10 Preparation Attaching the clamps and bundling the cables with the clamp Cable clamp (Large) Cable clamp (Small) Insert the cable Peel off the seal clamp in the hole on the back and on the Display leg attach as shown. as shown. Display (rear view) Arrange the system cable as...

  • Page 11: Removing The Stand And Speaker

    Preparation Removing the stand and speaker This unit has detachable type speaker. You can detach the system speaker when using external speaker. Before removing (or attaching) speaker, unplug the AC cord from the AC outlet and the system cable from the Display.

  • Page 12: Setting The Display On The Wall

    • Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

  • Page 13: Inserting The Batteries

    Preparation Inserting the batteries Before using the System for the first time, insert two “AA” size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AA” size batteries. Open the battery cover. Insert two supplied “AA”...

  • Page 14: Part Names

    Part names Display H LC-37AA1H VOLUME buttons INPUT MAIN POWER ( il/k ) button button (X) CHANNEL buttons STANDBY/ON button (CHs/r) Remote control sensor OPC sensor OPC indicator* STANDBY/ON indicator *OPC: Optical Picture Control (See pages 41 and 43.) LC-37AA1H(E)-a 03.11.6, 8:13 AM...
  • Page 15 Part names Display H LC-30AA1H VOLUME buttons INPUT MAIN POWER ( il/k ) button button (X) CHANNEL buttons STANDBY/ON button (CHs/r) SLEEP timer indicator Remote control sensor OPC sensor OPC indicator* STANDBY/ON indicator *OPC: Optical Picture Control (See pages 41 and 43.) LC-37AA1H(E)-a 03.11.6, 8:13 AM...

  • Page 16: Avc System

    Part names AVC System Front view Headphone PC INPUT terminal (AUDIO) INPUT 4 terminal (VIDEO) (When connecting headphones, the sound from the speakers is muted.) PC INPUT terminal STANDBY/ON indicator INPUT 4 terminals (AUDIO) (ANALOG RGB) X (POWER) button INPUT 4 terminal (S-VIDEO) CLEAR* (How to open the door) * If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting.

  • Page 17: Remote Control Unit

    Part names Remote control unit POWER To switch the power on and off. (See page 19.) FREEZE Change the still image mode. (See page 66.) P&P Set the dual picture mode. Press P&P again to return to normal view. (See page 65.) WIDE Change the wide image mode.

  • Page 18: Watching Tv

    (IEC 169-2), plug it into the ANTENNA INPUT terminal at the rear of the AVC System. Connecting to the power outlet * This picture is for LC-37AA1H. * This picture is for LC-30AA1H. Display (rear view) Display (rear view) Plug in to wall outlet.

  • Page 19: Turning On The Power

    When turning the AVC System on first Press X (POWER) on the AVC System. • The STANDBY/ON indicator on the AVC System lights LC-37AA1H LC-30AA1H up red. Press X (MAIN POWER) on the Display. • The System turns the power on.

  • Page 20: Simple Button Operations For Changing Channels

    Watching TV Channel display Simple button operations for Channel display changes approximately after 3 changing channels seconds as shown below. You can change channels in several ways. Using CHa a a a a /b b b b b on the remote control unit SAT.1 •...

  • Page 21: Simple Button Operation For Changing Volume/Sound

    Watching TV Using e on the remote control unit Simple button operation for changing e mutes the current sound output. volume/sound Changing the volume You can change the volume on the Display or on the remote control unit. il l l l l /k k k k k Press e.
  • Page 22 Watching TV Using Dolby V on the remote control unit Dolby V produces Dolby virtual effect from the speakers. Each time you press Dolby V, the mode changes between ON and OFF. Dolby Virtual sound options • ON: Makes it possible to enjoy natural, realistic surround sound.
  • Page 23 Watching TV Using MPX on the remote control unit In the TV mode of A2 TV broadcasts When receiving a stereo signal Each time you press MPX, the mode switches between STEREO and MONO. Stereo mode BBC2 STEREO In the NICAM TV broadcasts BBC2 When receiving a stereo signal Each time you press MPX, the mode switches between...

  • Page 24: Basic Adjustment Settings

    Full Mode* ..........Page 60 Cool Climate .......... Page 63 Rotate ............. Page 61 Language ..........Page 34 * Full Mode is only displayed for LC-30AA1H. Option Input Select ........... Page 54 Input Label ..........Page 55 Audio Out ..........Page 62 Cool Climate ..........

  • Page 25: Auto Installation

    [ Setup ... Auto Installation ] the actual operations. MENU Setup Option Auto Installation Programme Setup Child Lock Position Full Mode [Mode1] Rotate [Normal] Language [English] • Full Mode is only displayed for LC-30AA1H. LC-37AA1H(E)-c 03.11.6, 8:16 AM...
  • Page 26 Basic adjustment settings Automatic channel searching Channel auto search finds all channels viewable in your area. 01 55.25 02 85.25 03 102.25 NOTE • If no channel is found, “No programme found.” displays. And the auto installation finishes. LC-37AA1H(E)-c 03.11.10, 9:40 AM...

  • Page 27: Programme Setup

    • See page 64 for setting password. [ Setup ... Programme Setup ] MENU Setup Option Auto Installation Programme Setup Child Lock Position Full Mode [Mode1] Rotate [Normal] Language [English] • Full Mode is only displayed for LC-30AA1H. LC-37AA1H(E)-c 03.11.6, 8:16 AM...

  • Page 28: Manual Setting For Each Channel

    Position Full Mode [Mode1] Rotate [Normal] Language [English] • Full Mode is only displayed for LC-30AA1H. Press a/b to select “Manual Adjust”, and then press ENTER. Auto Search Manual Adjust Sort Press c/d to select “Yes”, and then press ENTER.

  • Page 29: Search Tuning

    Basic adjustment settings Manual setting for each channel (continued) Search tuning Press a/b/c/d to select the channel you want to edit, and then press ENTER. • The selected channel information displays. Press a/b to select “Search”, and then press ENTER. [Setup ...

  • Page 30: Colour System

    Basic adjustment settings Manual setting for each channel (continued) Press a/b to select the optimum sound system, and then press ENTER. Colour system NOTE • If you adjust this setting, please check the colour system information. (See left column.) Labelling channels When a TV channel sends its Network Name, the auto installation detects the information and assigns a name to it.

  • Page 31: Skipping Channels

    Basic adjustment settings Setting the child lock Manual setting for each channel (continued) You can block the viewing of any channel. Skipping channels Press a/b/c/d to select the channel you want to edit, and then press ENTER. • The selected channel information displays. Press a/b to select “Lock”, and then press ENTER.

  • Page 32: Sort

    Rotate [Normal] Next Language [English] • Full Mode is only displayed for LC-30AA1H. Press a/b to select “Sort”, and then press ENTER. • The channels are listed. Black ones are set 01 KABEL “Skip” to “Off” and blue are set “Skip” to “On”.

  • Page 33: Booster

    Basic adjustment settings Booster When set to “AUTO”, picture noise is reduced for TV broadcast signal strength from moderate regions. Automatically sets to “Off” for a strong electrolytic signal that has a constant level. Press MENU and the MENU screen displays. Press c/d to select “Option”.

  • Page 34: Language Setting For On-Screen Display

    Auto Installation Programme Setup Child Lock Position Full Mode [Mode1] Rotate [Normal] Language [English] • Full Mode is only displayed for LC-30AA1H. Press a/b to select the desired language listed on the screen, and then press ENTER. LC-37AA1H(E)-c 03.11.6, 8:17 AM...

  • Page 35: Picture Adjustments

    Basic adjustment settings Picture adjustments Press MENU and the MENU screen displays. Adjust the picture to your preference with the following picture settings. Press c/d to select “Picture”. • Picture menu displays. Press a/b to select a specific adjustment item. Press c/d to adjust the item to your desired position.

  • Page 36: Colour Management System)

    Basic adjustment settings C.M.S. (Colour Management System) Press a/b to select a specific adjustment item. Colour tone is managed using the six-colour adjustment setting. C. M. S. Changing reds [ 0] –30 closer to [ 0] –30 magenta or yellow. [ 0] –30 [ 0]...

  • Page 37: Colour Temperature

    Basic adjustment settings Colour temperature Black Adjusts the colour temperature to give the best white Allows you to select a level for automatic adjustment image. of a black areas of the image to suit viewing conditions. Press MENU and the MENU screen displays. Press c/d to select “Picture”.

  • Page 38: Monochrome

    Basic adjustment settings Monochrome Film mode For viewing a video in monochrome. Automatically detects a film-based source (originally encoded at 24 frames/second), analyses it then recreates each still film frame for high-definition picture quality. Press MENU and the MENU screen displays. Press c/d to select “Picture”.

  • Page 39: I/P Setting

    Basic adjustment settings I/P setting DNR (Digital Noise Reduction) Adjusting the image and input signal can give you a Produces a clearer video image. more beautiful picture. Press MENU and the MENU screen displays. Press c/d to select “Picture”. • Picture menu displays. Press a/b to select “Advanced”, and then press ENTER.

  • Page 40: Audio Adjustment

    Basic adjustment settings Audio adjustment Dolby Virtual You can also produce Dolby Virtual effects from the Sound adjustment “Audio” setting. You can adjust the sound quality to your preference with the following settings. Press MENU and the MENU screen displays. Press c/d to select “Audio”.

  • Page 41: Power Control

    Basic adjustment settings Power Control Power Control setting allows you to reduce the display brightness to save energy. Power control for AV source Power save When set to “Manual” or “Auto”, power consumption is reduced by decreasing backlight brightness. Press MENU and the MENU screen displays. Press c/d to select “Power Control”.
  • Page 42 Basic adjustment settings No signal Off No operation Off When set to “Enable”, the power will automatically shut When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes. down if there is no operation for 3 hours. Press MENU and the MENU screen displays.

  • Page 43: Power Control For Pc Source

    Basic adjustment settings Power management Power Control for PC source When set, the power will automatically shut down. Power Control allows you to reduce display brightness and save energy. Press MENU and the MENU screen displays. Press c/d to select “Power control”. •...

  • Page 44: Using External Equipment

    Using external equipment You can connect many types of external equipment to your System, like a VCR, DVD player, HDTV tuner, PC, game console and camcorder. To view external source images, select the input source from TV/VIDEO/PC on the remote control unit or INPUT on the Display. HDTV tuner DVD player AVC System...

  • Page 45: Watching A Dvd Image

    Using external equipment Watching a DVD image Connecting a DVD player You can use the INPUT 1 terminal when connecting to a DVD player and other audiovisual equipment. Component cable (commercially available) AVC System (rear view) When using component cable, select “COMPONENT”...

  • Page 46: Watching A Vcr Image

    Using external equipment Watching a VCR image Connecting a VCR You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment. AVC System (rear view) AV cable (commercially available) S-video cable (commercially available) Displaying a VCR image To watch a VCR image, select “INPUT2”...

  • Page 47: Enjoying A Game Console And Viewing Camcorder Images

    Using external equipment Enjoying a game console and viewing camcorder images Connecting a game console or camcorder A game console, camcorder and some other audiovisual equipment are conveniently connected using the INPUT 4 terminals. NOTE • The S-video terminal has priority over the video terminals. AVC System (front view) AV cable (commercially available)

  • Page 48: Viewing An Image From A Pc

    Using external equipment Viewing an image from a PC Connecting a PC Use the PC terminals to connect a PC. NOTE • The PC input terminals are DDC1/2B-compatible. • Refer to page 68 for a list of PC signals compatible with the System. AVC System (front view) RGB cable (commercially available)

  • Page 49: Connecting External Speakers

    Using external equipment Connecting external speakers Rear view How to connect the speaker cable Push down the tab. 1 1 1 1 1 Insert the end of the 2 2 2 2 2 cable. 3 3 3 3 3 Put the lid back down. When using external speakers CAUTION •...

  • Page 50: Selecting Speakers

    Using external equipment Selecting speakers You can output audio using the supplied speakers (detachable) or other external speakers. Press MENU and the MENU screen displays. Press c/d to select “Audio”. • Audio menu displays. Press a/b to select “Speaker”, and then press ENTER.

  • Page 51: Useful Adjustment Settings

    Child Lock Position Full Mode [Mode1] Rotate [Normal] Language [English] • Full Mode is only displayed for LC-30AA1H. Press a/b to select “H-Pos.” or “V-Pos.”. H-Pos. –10 V-Pos. –20 Reset Press c/d to adjust the item to your desired position.

  • Page 52: Moving The Picture On The Screen

    Useful adjustment settings Moving the picture on the screen You can move the picture around on the screen. Press a/b/c/d to move an image on the screen to the desired position. Press ENTER to return to the initial image position. NOTE •...

  • Page 53: Auto Sync. Adjustment (Pc Input Mode Only)

    Useful adjustment settings Auto Sync. adjustment (PC input Fine Sync. adjustment (PC input mode only) mode only) For automatically adjusting the PC image. Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimise the image.

  • Page 54: Input Signal Source

    Useful adjustment settings Input signal source Press a/b to select a signal type you want to set, and then press ENTER. Input selection • If the selected signal type is incorrect, an image Can use for selecting the input source. does not display or no colour image displays.

  • Page 55: Input Label

    Useful adjustment settings Input Label Press a/b/c/d to select each character of the new name for the channel, and then Lets you set the input terminal displayed using the press ENTER. INPUT SOURCE menu or channel display. CLEAR BACK – 0 1 2 3 4 5 6 7 8 9 Repeat the above until the name is fully spelt out, and then press ENTER.

  • Page 56: Colour System Setting (Av Input Mode Only)

    Useful adjustment settings Colour system setting (AV input AV mode selection mode only) AV mode gives you five viewing options to choose from to best match the system environment, which can vary u can change the colour system to one that is due to factors like room-brightness, type of programme compatible with the image on the screen.

  • Page 57: Wide Mode (For Av Input Mode)

    Useful adjustment settings WIDE mode (for AV input mode) WIDE MODE Normal Manual Selection Full 14:9 Press WIDE. Zoom 14:9 • The WIDE MODE menu displays. Panorama • The menu lists the wide mode options selectable for the type of video signal currently received. Full Cinema 16:9 Press WIDE or a/b while the WIDE MODE...

  • Page 58: Wide Mode (For Pc Input Mode)

    Useful adjustment settings WIDE mode (for PC input mode) Input signal (640m480) You can select the screen size. WIDE MODE NOTE • Connect the PC before making adjustments. (See page Normal 48.) Full • Selectable screen size may vary with input signal type. Dot by Dot Press WIDE.

  • Page 59: Input Signal (Pc Input Mode Only)

    Useful adjustment settings Input signal (PC input mode only) Press MENU and the MENU screen displays. • Some input signals may have to be registered manually to display properly. • The pairs of input signals (resolutions) in the list below Press c/d to select “Setup”.

  • Page 60: Selecting Full Mode Display (For Av Input Mode) (Lc-30Aa1H Only)

    Auto Installation Programme Setup Child Lock Position Full Mode [Mode1] Rotate [Normal] Language [English] • Full Mode is only displayed for LC-30AA1H. Press c/d to select “Mode1” or “Mode2”, and then press ENTER. Mode 1 Mode 2 LC-37AA1H(E)-h 03.11.6, 8:27 AM...

  • Page 61: Rotate

    Rotate [Normal] [ Setup ... Rotate ] MENU Language [English] Setup Option • Full Mode is only displayed for LC-30AA1H. Input Signal Auto Sync. Press a/b to select the desired mode, and then press ENTER. Fine Sync. Rotate [Normal] Language...

  • Page 62: Audio Out

    Useful adjustment settings Audio out Selected item Description Allows you to select what controls the audio output. • Sound via speakers is adjusted with il/k on the remote control unit or the Display. Fixed • Sound via the MONITOR OUTPUT terminal is not adjustable and constantly outputs.

  • Page 63: Cool Climate

    Useful adjustment settings Cool climate Improves LCD response when viewing fast-moving images. The effect is greater at low room temperatures (at or below 15˚C/59˚F). AV input mode PC input mode Press MENU and the MENU screen displays. Press MENU and the MENU screen displays. Press c/d to select “Option”.

  • Page 64: Password Setting For Child Lock (Tv Mode Only)

    Useful adjustment settings Password setting for child lock (TV Enter the same 4-digit number as in step 5 mode only) to confirm. • “The new password is registered.” displays. Allows you to use a password to protect certain settings from being accidentally changed. NOTE •...

  • Page 65: Useful Features

    Useful features Dual screen functions Press TV/VIDEO/PC to select another input source on the active screen. Allows you to display two pictures on the screen at • A selected image displays. one time. Dual screen Press P&P to exit dual screen. You can display two same-sized pictures except when inputting from a PC INPUT terminal.
  • Page 66 Useful features Picture and still image You can display two same-sized pictures – one moving and one still – when inputting from an AV source. Press FREEZE. • A moving image displays on the left screen and a still image displays on the right screen. The still image is one frame captured from a moving image at the moment you press FREEZE.

  • Page 67: Appendix

    Appendix Troubleshooting Problem Possible Solution • No power. • Make sure the Display and the AVC System are connected correctly. (See page • Check if you pressed POWER on the remote control unit. (See page 19.) If the indicator on the Display lights up red, press B (STANDBY/ON) button. •...

  • Page 68: Pc Compatibility Chart

    Appendix PC compatibility chart Remarks Resolution Frequency 640g400 85 Hz 720g400 70 Hz 85 Hz 640g480 60 Hz Macintosh 13 (67 Hz) 65 Hz 72 Hz 75 Hz 85 Hz 800g600 56 Hz 60 Hz 72 Hz 75 Hz 85 Hz 832g624 74.5 Hz Macintosh 16...

  • Page 69: Rs-232C Port Specifications

    Appendix RS-232C port specifications PC Control of the System • When a program is set, the display can be controlled from the PC using the RS-232C terminal. The input signal (PC/AV) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing.
  • Page 70 Appendix Response code format Normal response Return code (0DH) Problem response (communication error or incorrect command) Return code (0DH) Commands CONTROL CONTROL CONTROL ITEM COMMAND PARAMETER CONTROL ITEM COMMAND PARAMETER CONTENTS CONTENTS POWER OFF (STANDBY) WIDE MODE TOGGLE POWER SETTING INPUT SELECTION A INPUT SWITCHING (TOGGLE) NORMAL (AV)

  • Page 71: Specifications

    (g2), “AA” size battery (g2), Stand unit (g1), Cable clamp (Large g1, Small g1), Antenna cable (g1) • As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.

  • Page 72: Dimensional Drawings

    Dimensional drawings Display Unit: mm H LC-37AA1H 821.6 LC-37AA1H(E)-j 03.11.6, 8:31 AM...
  • Page 73 Dimensional drawings Display Unit: mm H LC-30AA1H 644.2 LC-37AA1H(E)-j 03.11.6, 8:31 AM...
  • Page 74 Dimensional drawings AVC System Unit: mm LC-37AA1H(E)-j 03.11.6, 8:31 AM...
  • Page 75 HOW TO SET THE FACTORY PRESETS Press and hold down CLEAR on the AVC System while it is in standby mode. Then press B (STANDBY/ON) button on the Display or POWER on the remote control unit to turn the System on. All setting items (except TV channel) return to the factory presetting.

This manual is also suitable for:

Lc-37aa1h

Table of Contents