Table of Contents
Advertisement
Preparation
Setting the System
H LC-37AA1H
After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamps for bundling the cables.
1
Removing the terminal cover
2
Connecting the system cable and the AC cord to the Display
3
Connecting the system cable and the AC cord to the AVC System
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
LC-37AA1H(E)-a
Display (rear view)
AC cord
AVC System (rear view)
7
Press the two hooks
toward the centre of the
Display and remove the
cover toward you.
Press down the two
upper hooks to remove
the cover toward you.
(WHITE)
Connect the plug into the
terminal and secure it by
tightening the thumb screws.
System cable
(BLACK)
System cable
(WHITE)
(BLACK)
(GREY)
AC cord
03.11.6, 8:12 AM
(GREY)
Connect the plug firmly
until the hooks on both
sides click.
7
Advertisement
Chapters
Table of Contents
