Watching Tv; Turning On The Power; Turning Off The Power - Sharp LC-30AD1E Operation Manual

Watching TV

Display
STANDBY/ON button
STANDBY/ON indicator
AVC System
STANDBY/ON indicator
POWER
Display status indicator
Off Power off
Flashing red AVC System does not turn on or its AC cord is disconnected.
Red The System is in standby mode.
Green The System is on.
AVC System status indicator
Power off
Off
Only the AVC System is in standby mode or the System is in standby mode.
Red
The System is on.
Green
LC-30AD1E(E)-b
MAIN POWER
21

Turning on the power

1
Press MAIN POWER on the Display.
• The STANDBY/ON indicator on the Display flashes red.
2
Press POWER on the AVC System.
• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up
green and the one on the AVC System lights up green.
• If the STANDBY/ON indicators still light up red, press
B on the remote control unit or STANDBY/ON button
on the Display to turn the System on.
When turning the AVC System on first
1
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System lights
up red.
2
Press MAIN POWER on the Display.
• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up
green and the one on the AVC System lights up green.
• If the STANDBY/ON indicators still light up red, press
B on the remote control unit or STANDBY/ON button
on the Display to turn the System on.
NOTE
• The initial auto installation starts when the System powers on for the first
time. If the System has been turned on before, the initial auto installation
will not be invoked. See page 27 to try auto installation from the Setup
menu.

Turning off the power

Press B on the remote control unit or STANDBY/
1
ON button on the Display.
• The System enters standby mode and the image on the
screen disappears.
• Both STANDBY/ON indicators change from green to red.
2
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System turns
off and the one on the Display flashes red.
3
Press MAIN POWER on the Display.
• The STANDBY/ON indicator on the Display gradually
turns off.
NOTE
• If you are not going to use this System for a long period of time, be sure to
remove the AC cords from the power outlet.
• Weak electric power is still consumed even when both MAIN POWER and
POWER are turned off.
• In digital mode, if the power is turned off immediately after a setting change
from the menu screen, the new setting or channel information may not be
memorized.
03.10.31, 1:16 PM
21