Film Mode; Film Mode; I/P Setting; I/P Setting - Sharp LC-30AD1E Operation Manual

Basic adjustment settings

Film mode

Automatically detects a film-based source (originally
encoded at 24 frames/second), analyses it then
recreates each still film frame for high-definition picture
quality.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Picture".
• Picture menu displays.
3
Press a/b to select "Advanced", and then
press OK.
[ Picture ... Advanced ]
MENU
Picture
USER
Contrast
Brightness
Colour
Tint
Sharpness
Advanced
Reset
4
Press a/b to select "Film Mode", and then
press OK.
• Some items may be greyed out. They are not
selectable.
C. M. S.
Colour Temp
Monochrome

Film Mode

I/P Setting

DNR
5
Press c/d to select "On", and then press
OK.
NOTE
• Set the Film Mode to "On" manually to detect a film-based
source (originally encoded 24 frames/second) when input
source has vertical frequency of 50 Hz (e.g. PAL, SECAM
etc.) .
56
LC-30AD1E(E)-e
Audio
[+30] 0 +40
[0] –30 +30
[0] –30 +30
+30
[0] –30
[0] –10 +10
On Off
56

I/P setting

Adjusting the image and input signal can give you a
more beautiful picture.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Picture".
• Picture menu displays.
3
Press a/b to select "Advanced", and then
press OK.
4
Press a/b to select "I/P Setting", and then
press OK.
• Some items may be greyed out. They are not
selectable.
C. M. S.
Colour Temp
Monochrome
Film Mode
I/P Setting
DNR
5
Press c/d to select "Interlace" or
"Progressive", and then press OK.
NOTE
• The I/P Setting is set to Progressive when Film Mode is "On".
03.10.31, 1:23 PM
Interlace Progressive