Problems With Windows Setup - NEC Express5800/320Fc-LR/MR Setup Manual

6-14 Troubleshooting

Problems with Windows Setup

The following message is displayed when the setup starts.
The s pecified disk is n ot foun d.
installation.
The disk to install the system is not connected properly. Check if the hardware is properly
installed and connected.
The following message is displayed while copying files from CD-ROM.
Press R. If this message still appears, perform the setup again. If the error persists,
contact your sales agent to examine the DVD-ROM drive.
Failed to setup in detail for network adapter.
The detailed setup of network adapter is not available in setup of NEC Express5800/320Fc
system. Open the control panel after starting Windows Server 2003 to configure the
network adapter.
Failed to install Windows Server 2003 correctly.
Have you checked instructions and information on installation?
See "Step 1: Things Required for Setup" (page 4-4) and "Step 2: Prepare for Express
Setup" (page 4-7).
Rebooted during the setup.
See "Step 3: Disable OS Boot Monitoring Function" (page 4-9), and set the parameter of
this machine's OS Boot Monitoring function to correct value.
ft Server Control Software UPDATE CD-ROM is not included.
ft Server Control Software UPDATE CD-ROM is used to update ft Server Control
Software; it may not be shipped with the equipment. (Not included if "NEC
EXPRESSBUILDER" CD-ROM contains the latest version of software programs at the
time of shipment). For the latest release of ft Server Control Software and purchase of the
latest version of its ft Server Control Software UPDATE CD-ROM, contact your sales
agent.
During a setup, "Previous Operating System C:" was selected on a selection screen of the
operating system.
The process will be stopped along the display of DOS prompt or black screen. In this
case, press Ctrl + Alt + Delete, or turn off the power to reboot the system. Installation
will be continued after a reboot.
Terminating SW