Table of Contents
Advertisement
4-4 Windows Setup
: Entered or selected by the user
: Proc eeds automatically
Step 1: Things Required for Setup
The following explains the setup procedure using the Express Setup program:
IMPORTANT:
Because "Express Setup" formats the entire area of the disk used for installation, all
data on that disk will be deleted. If there is any data partition other than system partition
that contains OS on the disk for reinstallation, you must back up important data in the
data partition first and then start "Express Setup."
Do not apply service packs to NEC Express5800/320Fc system based on your judgment.
If you desire to apply service packs, contact your sales agent about application status and
apply service packs to NEC Express5800/320Fc system.
TIPS:
For the latest information on support for Windows Service Pack, contact your sales agent.
You need the following to install Windows Server 2003 R2 32-bit Enterprise Edition:
Startup CD-ROM
NEC EXPRESSBUILDER (CD-ROM)
ft Server Control Software UPDATE CD-ROM
This CD-ROM is used to update ft Server Control Software; it may not be shipped with
the equipment. (Not included if "NEC EXPRESSBUILDER" CD-ROM contains the
latest version of software programs at the time of shipment.)
Microsoft® Windows Server™ 2003 R2 32-bit Enterprise Edition Disk1
(hereinafter referred to as "Windows Server 2003 CD-ROM")
Microsoft® Windows Server™ 2003 R2 32-bit Enterprise Edition Disk2
Windows Server 2003 Service Pack CD-ROM
It is recommended to apply the latest service pack supported by ft Server.
User's Guide (Setup) (this manual)
User's Guide
Step 15: Back up Sys tem Information
Setup completed
Advertisement
Table of Contents
