Table of Contents
Advertisement
(b) When the following message appears on the screen press F6 quickly.
<When starting Recovery Console from Windows Server 2003 CD-ROM>
(a) Insert the Windows Server 2003 CD-ROM into the drive.
(b) When the CD is set, reset the system (press Ctrl + Alt + Delete) or press the power
switch to power off and on to reboot the NEC Express5800/320Fc system.
(c) When the following message appears, press any key to start up from the CD-ROM.
IMPORTANT:
Press any key while the message is displayed. Otherwise the system will be
started up from a hard disk and Recovery Console will not be started.
(d) When the following message appears on the screen, press F6 quickly.
3.
When the screen to select SCSI drivers appears, follow the steps below.
(a) When the following screen is displayed, press the S key.
(b) Insert the "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into
the floppy disk drive, and then press Enter. The SCSI adapter list is displayed.
Troubleshooting 6-5
Advertisement
Table of Contents
