Table of Contents
Advertisement
Preparation
You need a support disk, "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" to start up
the Recovery Console. Have "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" ready
before starting the Recovery Console.
If you do not have a computer that runs Windows Server 2003 or Windows
2000/XP/NT.
Follow the steps below to create a "Windows Server 2003 OEM-DISK for NEC
EXPRESSBUILDER":
1.
Prepare a 3.5-inch floppy disk.
2.
Power on the peripherals and then NEC Express5800/320Fc system.
3.
Disable the configuration for OS Boot Monitoring function.
4.
Insert the NEC EXPRESSBUILDER CD-ROM into the drive of the server.
5.
Then, reset (pressing Ctrl + Alt + Delete) or power off/on NEC Express5800/320Fc system
to reboot it.
6.
From the [Tools] menu, select [Create Support Disk].
7.
From the [Create Support Disk] menu, select [Windows Server 2003 OEM-DISK for NEC
EXPRESSBUILDER].
8.
Follow the instructions on the screen to insert the floppy disk.
IMPORTANT:
Enable the configuration for OS Boot Monitoring function to deploy the system without performing
the system repair which uses the Recovery Console. In the BIOS setup, select [Server] - [Monitoring
Configuration] - [OS Boot Monitoring] and set appropriate time. See "Step 13: Enable OS Boot
Monitoring Function" (page 4-40) for details.
In the BIOS setup, select [Server] - [Monitoring Configuration] - [OS Boot
Monitoring] and choose "Disabled." See "Step 3: Disable OS Boot Monitoring
Function" (page 4-9) for details.
The system will start up from the CD-ROM to start NEC EXPRESSBUILDER.
"Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" will be
created on the floppy disk. Write-protect and place a label on the disk and keep it
in a safe place.
Troubleshooting 6-3
Advertisement
Table of Contents
