5.
Tentatively fasten the washers and plate
screws (short) to the 4 places on the front and
back sides (total: 8) from the rear.
6.
Fasten tightly the washers and round
screws (long) to the 2 places on the left
and right sides (total: 4) from the front.
7.
Fasten tightly the 4 round screws on the back
side and the 8 plate screws on the side panels
(which you fastened tentatively).
Installing Server 3-9
Washers and plate screws (short)
Washers and plate screws (short)
Washers and plate screws (long)
Round screws on the side panels