Copying With User Codes - Ricoh FT3813, FT4615, FT4618 Operating Instructions Manual

COPYING WITH USER CODES

The user code function allows you to restrict the copy operator and control
the number of copies made. If the user code function is on, operators must
input an authorized code before the machine can operate.
Please contact your service representative to set the user code mode, or to get
more information.
U2 is indicated in the copy counter until an user is entered.
1
Input your user code (3 digits)
using the Number keys. Press
the Auto Image Density key.
If you input the wrong number, press
the Clear/Stop key. Then, input the
correct number.
2
Make your copies.
3
To prevent others from making
copies using your user code,
press the Clear/Stop and Clear
Modes/Energy Saver key simul-
taneously after copying.
Regarding user codes,
63.
To set your copier for user codes,
contact your service representative,
see page 63.
42

COPYING WITH USER CODES

see page
KF2Jr-AE-6