Ricoh FT3813, FT4615, FT4618 Operating Instructions Manual page 60

Copier's condition
Check Paper Size indicator
is lit.
The Auto Image Density
indicator blinks.
The Manual Image Density
indicator blinks.
Misfeeds occur frequently.
If you cannot correct the problem by taking the above actions, please contact
your service representative.
IF YOUR COPIER DOES NOT OPERATE AS YOU WANT
You cannot use the bypass feed table in the Sort or
Stack mode and the Series Copies.
Select the paper tray.
Turn the main switch off and on. If this condition re-
occurs, call your service representative and explain the
problem.
Is the right kind of paper in the paper tray?
Paper size and weight must be within the
specifications for this copier.
Is folded, wrinkled, damp, or curled paper in the paper
tray?
Always use dry, undamaged paper.
Is the paper properly set in the tray?
Always load paper correctly.
Are there any pieces of misfed paper or other materials
in the machine?
Make sure that the paper path is completely
cleared of paper and other material after a misfeed.
KF2Jr-AE-7
Action
47