Where To Put Your Copier; Copier Environment - Ricoh FT3813, FT4615, FT4618 Operating Instructions Manual

WHERE TO PUT YOUR COPIER

Copier Environment

Your copier's location should be carefully chosen because environmental
conditions greatly affect its performance.
Optimum environmental conditions
R CAUTION:
Keep the equipment away from humidity and dust. Otherwise a fire or
an electric shock might occur.
Do not place the equipment on an unstable or tilted surface. If it top-
ples over, it could cause injury.
R CAUTION:
If you use the equipment in a confined space, make sure there is a
continuous air turnover.
Temperature: 10 - 30 C (50 - 86 F)
Humidity: 15 - 90%
A strong and level base.
The copier must be level within 5 mm, 0.2" both front to rear and left to right.
To avoid possible build-up of ozone, make sure to locate the copier in a large
well ventilated room that has an air turnover of more than 30 m
Environments to avoid
Locations exposed to direct sunlight or strong light (more than 1,500 lux.)
Locations directly exposed to cool air from an air conditioner or heated air from
a heater. (Sudden temperature changes might cause condensation within the
copier.)
Places where the copier might be subjected to frequent strong vibration.
Dusty areas.
Areas with corrosive gases.
Places higher than, 2,000m or 6,500 ft above sea level.
72

WHERE TO PUT YOUR COPIER

KF2Jr-AE-9
/hr/person.
3