Loading Paper; Loading Paper In The Paper Tray - Ricoh FT3813, FT4615, FT4618 Operating Instructions Manual

NOTE: Regarding paper sizes that can be set,
NOTE: If you want to change the paper size,
NOTE: For details about non-recommended copy paper and notes for copy
paper, see page 14 .
NOTE: To load paper in the bypass feed table,

Loading Paper In The Paper Tray

1
Pull out the paper tray until it
stops.
In case of Type 1 and 3, lower the
bottom plate.
2
Square the paper and set in the
paper tray.
Do not stack paper above the limit
mark inside the paper tray.
Slide the guides until the front and
rear guides securely hold the paper.
In case of Type 2, Make sure that
the leading corners of the paper are
under the corners as shown in the il-
lustration.
KF2Jr-AE-7

LOADING PAPER

LOADING PAPER

see page 14.
see page 56 .
see page 30.
49