Ricoh FT3813, FT4615, FT4618 Operating Instructions Manual page 16

WHERE IT IS & WHAT IT IS
1. Left scale
2. Main switch
3. Copy tray
4. Paper tray
5. Platen cover
6. Exposure glass
7. Operation panel
8. Front cover
9. 10-bin sorter
(Option of Type 2
and 3)
10. Document feeder
(Option)
11. Bypass feed table
12. Right Side Cover
13. Toner Bottle
14. Fusing Unit
Use to align originals on the exposure glass.
Switches the copier between on and standby
conditions. ("standby" means that the optional
anticondensation heater is on.)
Completed copies are delivered here.
Type 1: 250 sheets x 1
Type 2: 500 sheets x 1
Type 3: 250 sheets x 2
Lower this cover over originals for copying.
Position originals here face down for copying.
Operator controls and indicators are located here.
Open to access the inside of the copier.
Completed copies are sorted or stacked here.
Insert a stack of originals here. The originals are
individually fed onto and removed from the expo-
sure glass.
Use to copy onto paper of unusual size or
weight, or color paper.
Open to remove misfed papers.
Replace the toner bottle when the
indicator is lit.
Fuses the copy image to the paper. When ac-
cessing the inside of the copier, use caution.
This unit may be very hot.
f
Add Toner
3