[Layout] Tab; Setting Items - Xerox DocuPrint C3055 DX User Manual

Installation and Configuration on Windows 2000/XP/Windows Server 2003

[Layout] Tab

The following explains how to configure the [Layout] tab in the Printing Preferences
dialog box.

Setting Items

Multiple-Up - Prints multiple pages onto one sheet of paper.
NOTE: [Multiple-Up] is displayed only when the [Device Settings] tab > [Duplex
Module] is set to [Available] and the [Advanced] tab > [Enable advanced printing
feature] is selected.
Draw Outlines - Prints each page with a frame when [Multiple-Up] is enabled.
Fit to New Paper Size - Sets the size of the output paper. When this setting is different
from [Paper Size] on the [Paper/Output] tab, your document will be reduced /enlarged
to fit to the paper size selected here.
68