Xerox DocuPrint C3055 DX User Manual page 26

Installation and Configuration on Windows 95/98/Me
automatically retrieves the document name from the application from which the
document will be printed. If the name exceeds 12 alphanumeric characters, only the
first 12 characters will be valid.
Document Name - When [Retrieve Document Name] is set to [Enter Document
Name], enter the document name with up to 12 alphanumeric characters.
Fit to New Paper Size - Sets the size of the output paper. The document will be
automatically reduced/enlarged based on this setting and the [Paper size] setting on
the [Paper] tab.
For example, the document will be enlarged if the [Paper] tab > [Paper size] is set to
[B5] and the [Output Settings] tab > [Fit to New Paper Size] is set to [A4].
[Same as Paper Size] uses the paper size specified on the application.
Display warning message about Output Settings - When printing your document,
the print driver checks if the [Fit to New Paper Size] setting is consistent with other
settings. When there is a conflict, selecting this check box displays the [Conflicts] dialog
box. Leaving the check box blank does not display the dialog box and automatically
changes the [Fit to New Paper Size] setting to resolve the conflict.
Image Rotation 180 Degrees - Selecting the check box rotates the landscape or
portrait pages in your document by 180 degrees. When the [Graphics] tab > [Layout] is
set to an option other than [1-up], this rotates all pages by 180 degrees.
26