Barcode Sizes - Xerox DocuPrint C3055 DX User Manual

Barcode Sizes

The formulas for determining the approximate print sizes of barcodes are in the
following table.
The print sizes of barcodes vary depending on the characteristics of the printer, print
resolution, output paper, and other factors even when the same program is used. The
sizes derived from the following formulas do not guarantee the actual sizes of
barcodes. Use them only as reference.
Barcodes
type
JAN (standard)
JAN (short version)
Code 39
NW7
Code 128
ITF
(without bearer bar)
ITF
(with bearer bar)
Customer Barcode
P: Font size (point)
C: Number of characters
C1: Number of characters (0,1,2,3,4,5,6,7,8,9,-,$)
C2: Number of characters (:,/,.,+,A,B,C,D)
Width
P × 0.502
Side margins not included.
P × 0.354
Side margins not included.
P × (C + 2) x 0.106
Intercharacter gap of the left and right
sides not included.
"C" includes the checkdigit.
P × (C1 × 0.132 + C2 × 0.148 - 0.026)
Intercharacter gap of the left and right
sides not included.
"C1" and "C2" include the checkdigit.
P × (C x 0.081 + 0.096)
Formula for CODE C.
P × ((C/2 × 0.175) +0.093)
Quiet zone not included.
"C" includes the checkdigit.
P × ((C/2 × 0.137) + 0.323)
Bearer bar and quiet zone included.
"C" includes the checkdigit.
P × 7.297
Spaces before the black bar of START
code and after the black bar of the STOP
code are not included.
Formula
Height
P × 0.352
Indicates the height of the guard bar.
P × 0.352
Indicates the height of the guard bar.
P × 0.352
P × 0.352
P × 0.352
P × 0.352
P × 0.352
Bearer bar included.
P × 0.342
Indicates the height of the long bar.
Barcode Settings
113