Xerox DocuPrint C3055 DX User Manual page 67

Installation and Configuration on Windows 2000/XP/Windows Server 2003
- Absolute Colorimetric - Does not map the white in the images to the white of
the output paper. Depending on the [RGB Color Temperature] setting, the
white in the images may be printed with a tint of color.
NOTE: [RGB Color Correction] cannot be configured when the [Paper/Output] tab
> [Output Color] is set to [Black and White].
Enter RGB profile - Sets RGB profile. The [Enter RGB profile] setting will be applied
in conjunction with the [RGB Color Correction] setting. [Adobe RGB (1998)] is the
RGB profile of Adobe Systems Incorporated. [Adobe RGB (1998)] may not
accurately reproduce the tones of highly saturated graphics.
NOTE: [Enter RGB profile] can be configured only when the [Paper/Output] tab >
[Output Color] is set to [Color] and the [Image Options] tab > [Advanced Settings] is
selected.
RGB Gamma Correction - Adjusts the brightness of the RGB images on your
document. Select a value depending on the monitor being used. The larger the
value, the darker the output.
NOTE: [RGB Gamma Correction] can be configured only when the [Paper/Output]
tab > [Output Color] is set to [Color].
RGB Color Temperature - Adjusts the color temperature of your monitor to match
the on-screen colors to the printed output colors.
- 5000K(D50) - Colors become slightly more yellowish than [6500K (D65)].
- 9300K - Colors become slightly more bluish than [6500K (D65)].
NOTE: [RGB Color Temperature] can be configured only when the [Paper/Output]
tab > [Output Color] is set to [Color] and the [Image Options] tab > [Advanced
Settings] is selected.
Screen - Adjusts the image quality of your document.
Auto - Automatically adjusts the image quality based on the type of the document.
Fineness - Optimizes the reproduction of texts and lines.
Standard - Optimizes the reproduction of photographic images.
Gradation - Optimizes the reproduction of charts and graphs.
Color Balance - Displays the [Color Balance] dialog box.
Adjust Color Balance - Selecting the check box allows you to adjust the density of
the CMYK (cyan/magenta/yellow/black) toners.
To adjust the density of a color, select the color from [Target Color] and specify its
density for [Highlights], [Midtones], and [Shadows].
NOTE: Only [Black] can be adjusted when the [Paper/Output] tab > [Output Color]
is set to [Black and White].
67