[Paper/Output] Tab; Setting Items - Xerox DocuPrint C3055 DX User Manual

Installation and Configuration on Windows NT 4.0

[Paper/Output] Tab

The following explains how to configure the [Paper/Output] tab in the Default dialog
box.

Setting Items

Job Type -Sets the type of your print job to [Normal Print], [Secure Print], or [Sample
Print].
Normal Print - Prints a job without using the Secure Print or Sample Print feature.
Secure Print - Temporarily stores a print job in the printer, rather than printing it
immediately, until you manually start the printing from the control panel.
Sample Print - Allows you to print a proof copy of a multi-set job and prints the entire
sets once the print result has been verified. If you set the print quantity to 1, this
setting automatically changes to [Normal Print].
NOTE: To select [Secure Print] and [Sample Print], the [Device Settings] tab >
[Hard Disk] must be set to [Available].
Setup - This button becomes active when [Job Type] is set to [Secure Print] or [Sample
Print]. Clicking the button displays the [Secure Print] or [Sample Print] dialog box.
42