Part Or The Entire Output Is Black - Fuji Xerox DocuPrint CM305 df User Manual

Part or the Entire Output Is Black

Problem
Part or the entire output is black.
Action
Ensure Output Color is set to Color in the print driver. The following
procedure uses the PCL 6 driver as an example.
1 On the Image Options tab, ensure that the Output Color is set to
Color.
If the problem persists, replace the drum cartridge if you have a spare
cartridge.
Replace the drum cartridge if you have a spare cartridge.
See also:
• "Replacing the Drum Cartridge" on page 474
• "Installing the Drum Cartridge" on page 477
If the problem persists, contact the Fuji Xerox local representative
office or an authorised dealer.
Troubleshooting 410