Basic Operations; Switching On And Off The Power; Switching On The Power; Switching Off The Power - Xerox DocuPrint C2100 Quick Reference Manual

3

Basic Operations

Switching On and Off the
Power

Switching On the Power

1. Press the power switch of the printer to the
<I> position.
2. When the power is on, "Diagnosing..." is
displayed on the control panel, then it
changes to "Please wait...". When the printer
is ready for printing, "Ready to print" will be
displayed.
Important
• When an error message is displayed, remedy the error
by referring to "Error Messages" (P. 41).

Switching Off the Power

Important
• Do not switch off the power of this printer when printing
is in progress. It may lead to a paper jam.
• Once the power is switched off, print data remaining in
this printer or information saved in the memory of this
printer will be deleted.
1. By checking the display on the control panel,
confirm that the printer is not processing any
data.
2. Push the power switch of this printer to the
< > position to switch the power off.
Low Power Mode/Sleep
Mode
This printer has the low power mode and the sleep
mode to reduce power consumption when it is left
idle.
When no print data is received for 3 minutes, the
printer will enter the low power mode. When no
data is received for a further 2 minutes (a total of
5 minutes lapse (default) since the last receiving
data), it will enter the sleep mode by default.
When it enters the low power mode, the display of
the control panel gets dark and "Ready/Standby"
is displayed.
When it enters the sleep mode, only the <Power
Saver> indicator lights and other indicators go out.
Also, the display of the control panel blacks out
and nothing is displayed. The time ranges to
specify for the printer to go into the low power
mode or the sleep mode are 3 to 60 minutes or 2
to 120 minutes, respectively. Consumption of
power during the sleep mode is 9 W or less and
the time required to exit from the sleep mode to a
print-ready status is about 30 seconds.
Note
• You can change the settings so that the printer does not
enter the sleep mode.
• For details on the low power mode/sleep mode and the
procedure to change the settings, refer to "5 List of
Menu Items on the Control Panel" (P. 28) or User Guide
4.2 Description of Menu ltems.

Switching On and Off the Power

IE
IE
19