Table of Contents
Advertisement
3
Basic Operations
Switching On and Off the
Power
Switching On the Power
1.
Press the power switch of the printer to the
< | > position.
2.
When the power is on, "Diagnosing..." will be
displayed on the control panel. When the
printer is ready for printing, "Ready to print"
will be displayed.
Important
• When an error message is displayed, remedy the error
by referring to "Error Messages Displayed at the Control
Panel" (P. 43).
Switching Off the Power
Important
• Do not switch off the power of this printer when printing
is in progress. It may lead to a paper jam.
• Once the power is switched off, print data remaining in
this printer or information saved in the memory of this
printer will be deleted.
1.
By checking the display on the control panel,
confirm that the printer is not processing any
data.
2.
Push the power switch of this printer to the
< > position to switch the power off.
Power Saver Modes
This printer is equipped with the power saver
mode 1 and the power saver mode 2 to reduce
power consumption when it is left idle.
When no print data is received for 3 minutes, the
printer will enter the power saver mode 1. When
no data is received for a further 5 minutes, it will
enter the power saver mode 2 by default.
When the printer enters power saver mode 1, the
screen on the control panel becomes dark and
"Ready/Standby" is displayed.
When the printer enters power saver mode 2, only
the <Power Saver> indicator lights; all the other
indicators go out. The display also goes out, and
nothing is displayed. The time ranges to specify
for the printer to go into the power saver mode 1
or the power saver mode 2 are 1 to 60 minutes or
1 to 120 minutes, respectively. Consumption of
power during the power saver mode 2 is 7 W or
less (for AC 110 - 127 V) or 9 W or less (for AC
220 - 240 V) and the time required to exit from the
power saver mode 2 to a print-ready status is
about 39 seconds.
Note
• You can specify for the printer not to go into the power
saver mode 2.
• For details on the power saver mode and the procedure
to change the settings, refer to "6 List of Menu Items on
the Control Panel" (P. 32) or User Guide 4.2 Description
of Menu Items.
Switching On and Off the Power
IE
IE
25
Advertisement
Table of Contents
