Table of Contents
Advertisement
34 Maintenance
Replacing the fuse
Locate the fuse holder just below the AC power-input jack
(shown in the illustration below). Use a small flat-blade
screwdriver to remove the fuse holder.
USE ONLY WITH 250V FUSE
Note:
If you want to remove the fuse holder, you must open
the projector to its raised position. If the projector is already
open, unplug the power cord from the wall outlet and from
the projector before you attempt to remove the fuse holder.
Replace the fuses only with the type and rating shown on
the label. If the projector repeatedly blows fuses, return it for
servicing.
AC power
input jack
Fuse
holder
Advertisement
Table of Contents
