Table of Contents
Advertisement
Illuminated indicators
POWER
Control panel
REPLACE LAMP
The POWER key glows red when you plug the projector
power cord into an AC wall outlet. After the red light is on,
use the POWER key on the control panel to turn on the pro-
jector and lamp.
An illuminated control-panel indicates that the projector is
in operation; the projector lamp should also be on.
When illuminated, REPLACE LAMP indicates that the LAMP
HOURS value is zero. Refer to LAMP HOURS in the Menu-
mode on-screen control section of this chapter or to Lamp
replacement in Chapter 4, Maintenance.
Using the projector 27
Advertisement
Table of Contents
