Symptom
No image on
Macintosh monitor
No screen image with
Macintosh PowerBook
Inexplicable or
unresolved problem
Where to get help
1 Check the Troubleshooting guide .
2 Call your dealer's technical support line and explain your
3 Call Polaroid Corporation (see pages 44 and 45).
Cause
Incorrect Macintosh
computer and monitor
adapters
PowerBook must be
turned on after projector
is connected
If at any time you need help:
problem.
Troubleshooting 43
Solution
Use 550093-002 and
550093-003 adapters with
15-in. Macintosh multisync
monitor or with 12-in.
Macintosh monitor; use
550093-000 and 550093-001
adapters with non-multisync
Macintosh monitors
Turn off the PowerBook,
then turn it on again;
be sure to enable Monitor
Mirroring on the PowerBook
control screen
Before calling for technical
assistance press RESET
to restore factory default
settings, then use control
panel and Menu-mode on-
screen controls to restore
image enhancements