Table of Contents
Advertisement
PALETTE
TINT
TONE
LAMP HOURS
Language
To use the PALETTE function, press and release MENU,
then press either the
or
until you display PALETTE. Press either the
switch from one of two color modes: 8-color or 16,194,277-
color. A graphic appears on screen to indicate the current
PALETTE setting.
To use the TINT function, press and release MENU, then
press either the
or
key to scroll through the menu until
you display TINT. Press the
color image. Press the
key to increase the green in the
color image. A graphic appears on screen to indicate the
current relative value of the TINT setting.
To use the TONE function, press and release MENU, then
press either the
or
key to scroll through the menu until
you display TONE. Press the
tones of the speaker output. Press the
high tones of the speaker output. A graphic appears on
screen to indicate the current relative value of the TONE set-
ting.
To use the LAMP HOURS function, press and release
MENU, then press either the
the menu until you display LAMP HOURS. A graphic
appears on screen to indicate the current relative LAMP
HOURS value. The LAMP HOURS value is based upon an
expected average lamp life. As you use the projector, the
lamp-hour value decreases incrementally toward 0. When
the lamp-hour value reaches 0, the REPLACE LAMP indica-
tor lights. Press either the
HOURS value to its maximum value and to extinguish the
REPLACE LAMP indicator.
To use the language function, press and release MENU,
then press either the
or
until you display ENGLISH, FRENCH, GERMAN, or SPAN-
ISH. Press either the
or
languages. The current language selected appears on the
screen.
Using the projector 25
key to scroll through the menu
or
key to
key to increase the red in the
key to increase the high
key to decrease the
or
key to scroll through
or
key to reset the LAMP
key to scroll through the menu
key to choose one of the four
Advertisement
Table of Contents
