Table of Contents
Advertisement
24 Using the projector
Menu-mode on-screen controls
INVERSE
WIDTH
FOCUS
MIRROR
The Menu-mode on-screen controls let you adjust the pro-
jected image and enhance the appearance of your presenta-
tion. The function of each on-screen control is described
below.
To use the INVERSE function, press and release MENU,
then press either the
or
until you display INVERSE. Press either the
switch between positive and negative images. A graphic
appears on the screen to indicate the current INVERSE set-
ting.
To use the WIDTH function, press and release MENU, then
press either the
or
key to scroll through the menu until
you display WIDTH. Press the
the image. Press the
key to reduce the width of the image.
A graphic appears on the screen to indicate the current rela-
tive value of the WIDTH setting. WIDTH may affect the
FOCUS control; refer to the Troubleshooting guide in Chap-
ter 5 for more information.
To use the FOCUS function, press and release MENU, then
press either the
or
key to scroll through the menu until
you display FOCUS. Press either the
from 8 possible image-phase-adjustment settings. A graphic
appears on screen to indicate the current FOCUS setting.
The WIDTH control may affect FOCUS; refer to the Trou-
bleshooting guide in Chapter 5 for more information.
To use the MIRROR function, press and release MENU, then
press either the
or
key to scroll through the menu until
you display MIRROR. Press either the
from the standard to the mirror (reverse) image. A graphic
appears on screen to indicate the current MIRROR setting.
key to scroll through the menu
or
key to
key to increase the width of
or
key to select
or
key to switch
Advertisement
Table of Contents
