Table of Contents
Advertisement
22 Using the projector
F1, F2
REPLACE LAMP
POWER
You can program the F1 and F2 keys as shortcut keys to
any Menu-mode on-screen controls that you want to use
regularly, eliminating the need to to go through the on-
screen menus. To program the F1 or F2 key, first select the
desired Menu-mode on-screen control. Then press F1 or F2,
and the F1 on-screen graphic appears. Press F1 or F2 a sec-
ond time to program the key for the selected Menu-mode
on-screen control. The F1 or F2 key now selects the Menu-
mode on-screen control automatically. If you do not press
F1 or F2 a second time within five seconds, the F1 and F2
programs remain unchanged.
The REPLACE LAMP indicator lights when the LAMP
HOURS value reaches zero. Use the LAMP HOURS on-
screen control to reset the value. After you reset the value,
the REPLACE LAMP indicator goes out.
Press POWER to turn the projector and lamp on. Press it
again to turn the projector and lamp off.
Advertisement
Table of Contents
