Table of Contents
Advertisement
Basic setup
1 Plug the projector into an AC wall outlet (the POWER button
2 The projector has built-in speakers that can amplify audio
3 If you wish, connect an external amplified, mono or stereo
4 You can connect a video source such as a VCR or LaserDisc
For basic setup, follow these steps:
on the projector control panel starts to glow).
input. Connect a stereo or mono audio source, such as the
auxiliary output of an amplifier, CD player, tape player, VCR
or LaserDisc to the AUDIO IN jack. Use either the
or the d
stereo audio cable
ual RCA audio cable
speaker system to the AUDIO OUT jack on the projector.
Note:
When you plug a cable into the AUDIO OUT jack, you
disable the built-in speakers of the projector.
player to the VIDEO jack on the projector. Use the PC video
cable. If your video system has S-VHS capabilities, use the
cable supplied with your video system to connect it to the
S-VHS jack on the projector.
Detailed setup 13
3.5mm
.
Advertisement
Table of Contents
