10 Detailed setup
Positioning the
projector in front
of the projection
screen
Image size
When fully raised, the mirror should tilt upward at a approxi-
mately a 45 degree angle from the top of the projector, as
shown below.
Ensure that nothing is blocking the projector vents.
Note:
The projector takes in cool air through vents on both sides. It
expels hot air from vents at the rear of the projector.
The size of the projected image depends on the distance
between the projector and the projection screen. The follow-
ing table shows the projected image size, measured diago-
nally, based on this distance.
Distance between
projector and screen
Image width
4 ft/1.2 m
4.2 ft/1.3 m
5 ft/1.5 m
5.1 ft/1.6 m
6 ft/1.8 m
6.2 ft/1.9 m
7 ft/2.1 m
7.2 ft/2.2 m
Image height
3.1 ft/0.9 m
3.9 ft/1.2 m
4.7 ft/1.4 m
5.4 ft/1.6 m