Table of Contents
Advertisement
Symptom
Split image or
partial image
POWER button not
illuminated on
control panel
No audio from
built-in speakers
Cause
Image alignment needed
Incompatible video signal
from computer
Projector not connected
to AC wall outlet
Defective AC wall outlet
No audio source
connected
Projector not turned on
Projector not connected
to AC wall outlet
AC wall outlet defective
Audio source turned off
Audio source not
connected to
appropriate video input
Audio source and audio
output cables are reversed
VOLUME control
set too low
External amplified speaker Disconnect external system
system connected to
AUDIO OUT jack
Troubleshooting 41
Solution
Use up-down and
left-right arrow keys
Check that computer video
source is compatible with
projector; see Appendix A,
Specifications; contact Polaroid
to verify compatible sources
Reset projector to factory
default settings
Plug cord into outlet
Contact electrician;
do not attempt repair
Connect audio source
Turn on projector
Connect projector to wall
outlet
Contact electrician
do not attempt repair
Turn on audio source
Replace with appropriate
cable
Use appropriate connections
Adjust VOLUME
Advertisement
Table of Contents
