Lfo Section - Native Instruments Skanner User Manual

[3] MIX: Selects the source of the feedback signal by crossfading between:
▪ 0 - Filter output (polyphonic)
▪ 1 - Wet signal of the Reverb (monophonic)
▪ 2 - Mixed signal of the Reverb (monophonic)
Monophonic feedback will cause intermodulations between the voices. The Master volume has
no influence on the feedback signal.
5.7.4

LFO Section

The LFO produces Sine, Triangle, Pulse and Random waveforms. The
to crossfade between these four sources (0 = sine, 1 = triangle, 2 = pulse, 3 = random). The
SYM knob adjusts the symmetry and by this can bend the triangle to become a sawtooth or
reduce the pulse width of the Pulse signal.
As a polyphonic unit it can be synced to note-ons, with adjustable start phase and fade-in time
and it has a Keyboard Tracking parameter.
In the CLOCK SYNC mode
duce a signal that is synced to the global clock.
LFO Parameters
View B — Overview of LFO section
[1] Keyboard Tracking: Keyboard tracking amount of the LFO frequency
If this slider is set to zero and
[2] RATE: LFO frequency [Hz].
KEY SYNC and Keyboard Tracking will be disabled. All voices pro­
KEY SYNC is off the LFO becomes monophonic.
Overview of SKANNER Ensemble
Modulators Section
SHAPE knob allows you
SKANNER - Manual - 46