Oscillators A And B Sections - Native Instruments Skanner User Manual

Modulation targets:
Delay tune
Feedback gain
5.7.1

Oscillators A and B Sections

The main sources for the modulation of the sample position are the two oscillators. You will
never hear the original oscillator waveforms, but only the result of their transformation by the
sample-based shaper.
Oscillators A and B cover a wide frequency range including LFO frequencies. Their keyboard
scaling is adjustable. The
tooth. The output signal going to the sample reader is controlled by an
oscillator.
The phase modulation inputs of the oscillators give the possibility to distort their waveforms by
the feedback signal, which can create additional harmonics or non-harmonic products, includ­
ing noise and chaotic behavior.
Oscillators A and B are identical therefore, only parameter descriptions for Oscillator A will
follow. Please use this as a reference for both oscillators.
Oscillator A and B Parameters
View B — Overview of Oscillator A and B.
[1] SHAPE: Oscillator waveform:
▪ left end: Sine
Osc A Osc B
- -
- -
SHAPE knob morphs the waveform between Sine, Triangle and Saw­
LFO Env
X X
X X
ADBDSR
Overview of SKANNER Ensemble
Modulators Section
Feedback
-
-
envelope per
SKANNER - Manual - 42