Preset Morpher Section - Native Instruments Skanner User Manual

Overview of SKANNER Ensemble
Overview of SKANNER User Interface - View A
[5] KEY (Key Sync): This mode sets Key Sync for the phase of the LFO. If this is on, the phase
is reset to the adjusted PHASE with every note-on.
5.2.4

Preset Morpher Section

The preset (Snapshot) system of REAKTOR stores presets in banks of up to 128. The Snap­
shots of a bank are numbered from 1 to 128. The REAKTOR user interface has a Snapshot
Morphing and Random feature where two Snapshots can be selected and morphed by a slider,
smoothed by a morph time.
Morphing means that each adjustable sound parameter is continuously changed to perform a
linear transition from the setting in the first snapshot to the setting in the second snapshot. A
morph can be stopped at any point and can be reversed or modulated by other movements.
However, the switchable parameters cannot be morphed. In SKANNER they are set at the be­
ginning of a morph movement.
SKANNER makes the morphing feature available from the View A panel of the instrument. It
provides morph start and stop by simple mouse clicks as well as LFO control and direct control
by a POSITION knob.
Preset Morpher Parameters
View A — Preset Morpher
[1] Preset Morpher Enable / Disable: Use this button to enable or disable the PRESET MOR­
PHER.
SKANNER - Manual - 23