Filter Section - Native Instruments Skanner User Manual

Destination 1
Pos: Crs Speed
Delay: LFO
Delay: Env
Filter: Lo Cut
Mixer AM
5.8.4

Filter Section

FILTER is a Macro Controller with up to two destinations in the 8-pole Filter.
Filter Parameters
[1] FILTER: The Macro Control knob which is the source of modulation for the target parame­
ters.
[2] Modulation Target Menus: The
by drop-down menus each with its own control level. It is suggested to assign it to a MIDI con­
troller like an expression pedal or as a sequencer automation parameter. By pressing the but­
ton on the left the fader can be replaced by the signal of the monophonic LFO. Control amount
of the Macro Controller on the first, second and third target.
[3] Amount Sliders: Control amount of the Macro Control on the first and second target.
[4] LFO: When this button is activated the
LFO.
Destination 2 Destination 3
Pos: Fine AM: x^2
Filter: Hi Cut LFO: Wave
LFO: Rate LFO: Symmetry
Mixer: Sample Mixer: Sample
Mixer: Delay Mixer: Filter
FILTER macro control has three targets that can be chosen
FILTER knob is replaced by the signal of the Global
Overview of SKANNER Ensemble
Macro Controls Section
SKANNER - Manual - 52